• Viking_Hippie@lemmy.world
      link
      fedilink
      English
      arrow-up
      86
      arrow-down
      4
      ·
      edit-2
      2 months ago

      And always about protecting the hegemony of the rich and powerful.

      It’s never about the struggling artist/inventor just wanting to be paid for their work as the lobbyists and the politicians they own pretend every time they want to fuck over regular people some more.

      • doodledup@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        arrow-down
        25
        ·
        edit-2
        2 months ago

        The rich didn’t come up with the IP. It was the employees who did. They also want to get paid. Imagine someone stealing your ideas and then you losing your job over it.

        • ShepherdPie@midwest.social
          link
          fedilink
          English
          arrow-up
          31
          arrow-down
          1
          ·
          2 months ago

          B/S. The article states that this company bought the IP from Makerbot in 2013 so nobody working there was responsible for creating these patents. This is like when people claim that piracy hurts the people working on the set of a movie. It actually doesn’t because those people were already paid their wages while the billion dollar corporations are the ones who own the rights and profit off of sales with none of that going to the workers outside of their normal wage.

          • doodledup@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            arrow-down
            17
            ·
            2 months ago

            If there is no incentive to make profits on IP, nobody will hire people to develop the IP. Congrats, you made the rich lose their profits but you also made everyone lose their jobs.

            • Maggoty@lemmy.world
              link
              fedilink
              English
              arrow-up
              17
              arrow-down
              1
              ·
              2 months ago

              Ah yes because nobody had jobs before IP law and nothing was invented.

              • doodledup@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                arrow-down
                11
                ·
                edit-2
                2 months ago

                IP law was invented when it became necessary to protect it. We no longer live in a cave but in a globalized and industrialized world economy.

                Most value nowadays is IP. Producing goods is easy, everyone can do that now. Manufacturing is easy. Logistics is easy. Inventing stuff is NOT easy anymore in a digitalized world! So in order to encourage innovation, we need to have incentives that protects your innovation and pays your bills. And since most innovation is IP, we need IP protection. Simple logic. The alternative would be total economical collapse.

                Your idealistic world view simply doesn’t work in this day and age.

                • Maggoty@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  8
                  ·
                  2 months ago

                  No. We did it because IP is inherently anti competitive and we were very concerned with protecting monopolies. They were literally crown granted monopolies. Then they changed in the industrial era to be tools for the Robber Barons. And the corporations after that.

                  It has never been a mechanism that creates jobs. It’s entire purpose is to shut down competition, to kill jobs. It has never protected inventors. Just the people who can afford more lawyers to convince the court their design is legally distinct.

                  The economy? The economy would boom and we wouldn’t be worried about legally distinct rectangles between Apple and Samsung. (The true message of which is, “don’t you dare try to enter this market, you’ll get sued into the dirt.”)

  • JohnDClay@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    112
    ·
    edit-2
    2 months ago

    US9421713B2 - Additive manufacturing method for printing three-dimensional parts with purge towers

    US9592660B2 - Heated build platform and system for three-dimensional printing methods

    US7555357B2 - Method for building three-dimensional objects with extrusion-based layered deposition systems

    US9168698B2 - Three-dimensional printer with force detection

    US10556381B2 - Three-dimensional printer with force detection

    That’s like all of 3d printing, that’s pretty scary. If they win on all 5, seems like it’d kill consumer 3d printing entirely.

    • Schmeckinger@lemmy.world
      link
      fedilink
      English
      arrow-up
      60
      arrow-down
      1
      ·
      2 months ago

      When I look at these patents all of them seem to be patenting others inventions from years ago. So I hope prior art wins.

    • Thunderbird4@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      2 months ago

      Eastern District of Texas is extremely favorable to patent trolls. It’s not a coincidence that they filed the suit there.

    • thisbenzingring@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      11
      ·
      edit-2
      2 months ago

      I read the heated bed patent and it was about the way it’s built, so I’m not convinced it’s a general hot bed patent but something more small detail about how they are using it.

      I suspect someone will need to do more research and this article is a knee jerk reaction

    • I Cast Fist@programming.dev
      link
      fedilink
      English
      arrow-up
      8
      ·
      2 months ago

      That seems geared only towards FDM printers, so SLA (resin) is still ok-ish? I do suppose those really big powder printers could also suffer.

  • empireOfLove2@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    90
    arrow-down
    1
    ·
    2 months ago

    Patent trolls doing patent troll things. Stratasys no longer provides usable value to the enterprise market and they’re stagnating bad, their only hope is to start suppressing competition through overly broad, unrefined patents obviously tailored to provide a blanket market lockout.

    They’ve done it before and they’ll do it again. Fuck Stratasys, uncompetitive monopolistic fucks.

    • ShepherdPie@midwest.social
      link
      fedilink
      English
      arrow-up
      19
      ·
      2 months ago

      I hope it gets tossed out of court considering companies have been freely using these patents for years and their just now going after someone because Bambu has been so much more successful than a lot of the cottage-type companies who’d previously been building most printers. You can’t simply wait for a big fish to decide to start enforcing your patent rights because by then it’s been used to much without any push back that you’ve effectively given up the rights.

      • empireOfLove2@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        7
        ·
        2 months ago

        There is certainly a lot of precedent for them not defending patents, especially those now expired.

        Unfortunately this is the Texas circuit court so any kind of critical thinking or obvious precedent won’t matter, and the biggest corporation will win by default until appealed. We will just have to hopee Bambu has the resources to survive in the US market until then, as the court will likely force a stop sale injunction or large penalties on device sales.

      • Hugin@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        2 months ago

        You can lose trademarks if you knowingly don’t defend them but it’s pretty hard to lose a patent. Even it gets added to a standard you participate it just goes into FRAND.

        • ShepherdPie@midwest.social
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 months ago

          I think I got the two mixed up then. Regardless (I’m probably preaching to the choir), this seems like a ridiculous lawsuit and I hope they get sent packing.

          • Hugin@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            2 months ago

            I’m not a big fan of these patents having been awarded and patent law needs serious overhaul. That said I think there is a good chance the lawsuit is successful. Three are a lot of patents in 3D printing that the open source community is just waiting for them to expire.

  • YeetPics@mander.xyz
    link
    fedilink
    English
    arrow-up
    58
    ·
    edit-2
    2 months ago

    Lmao, as an idiot trying to get a 20y/o stratysys running at work, I can see why they’re trying to sue.

    Their machines are trash and wildly outdated, DRM spools locked into cases and disposable beds are GARBAGE.

    Turns out they spent a lot of time developing the ‘cutting edge’ FDM tech from 30 years ago and can’t quite keep up with their coreXY counterparts.

      • YeetPics@mander.xyz
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 months ago

        The print beds are SINGLE USE injection molded ABS(I think it’s ABS, anyhow).

        They snap over the heating element and seem to be a gigantic waste of resources. You can tell R&D was pushed to make their machines as profitable as possible by avoiding reusable parts.

        You can’t refill their spool cassettes either without some RFID hacking.

        It’s fuckin’ bogus.

    • apemint@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      ·
      2 months ago

      We have 3 Stratasys printers at work and yeah, you’re absolutely correct.

      To add, their ‘professional’ slicer program “Insight” is the most user hostile piece of software I’ve ever laid my eyes on. Straight out of 1992 levels of awful. The workflow, the UI (if you can call it that), everything.

      The other ‘user friendly’ slicer is “GrabCAD Print”, an Apple style piece of garbage. It lacks everything beyond basic functionality, yet lately they’ve been pumping it full of subscription locked features.

      Honestly, fuck this company.

  • Takumidesh@lemmy.world
    link
    fedilink
    English
    arrow-up
    55
    arrow-down
    2
    ·
    2 months ago

    Good news is, you will never be able to stop hobbyist 3d printing.

    Sorry patent trolls, you can’t make aluminum extrusion, stepper motors, an extruder, and a short circuit illegal.

  • jabjoe@feddit.uk
    link
    fedilink
    English
    arrow-up
    28
    ·
    edit-2
    2 months ago

    These patents seam trivial obvious ones. Hope they get knocked down during the case.

    • TWeaK@lemm.ee
      link
      fedilink
      English
      arrow-up
      25
      ·
      2 months ago

      Almost not surprising. Inventors and R&D businesses patent things all the time, then it takes a while to claim them. There was a guy in Australia who apparently invented WiFi (he calls it “wiffey”) and he successfully asserted his patent against WiFi manufacturers worldwide such that they paid him a couple pennies in royalties for every chip manufactured.

      The saving grace is that patents only last for 20 years. After that, anyone can use the design, like Gillette’s double edged safety razor (which is why their modern razors are so silly and change every few years).

        • PerogiBoi@lemmy.ca
          link
          fedilink
          English
          arrow-up
          19
          arrow-down
          1
          ·
          2 months ago

          And sheer toxicity. You need fume vents and air quality monitoring for processing resin.

          • BeardedGingerWonder@feddit.uk
            link
            fedilink
            English
            arrow-up
            7
            ·
            2 months ago

            The the damn resin absorbing into your skin and curing the next time you’re in direct sunlight. Resin is super detailed, but I can’t say I particularly enjoy doing it.

              • Honytawk@lemmy.zip
                link
                fedilink
                English
                arrow-up
                2
                ·
                2 months ago

                Eh, it isn’t so bad as long as you take precaution.

                Wear gloves and a mask, and make sure to keep your tools separate.

                • PerogiBoi@lemmy.ca
                  link
                  fedilink
                  English
                  arrow-up
                  2
                  ·
                  2 months ago

                  I wonder how may people that have bought a $250 printer from Amazon are taking those precautions or even know they need to.

          • june (she/her)@lemmy.ml
            link
            fedilink
            English
            arrow-up
            5
            ·
            2 months ago

            Miniatures ≠ most of the 3d printing market. Minis may be fine but the rest of the 3d printing space will be at risk and covers a great deal more use cases.

        • otter@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          5
          ·
          2 months ago

          I’m not sure what qualifies as “hobbyist” in your book, but the vast majority of hobby-level printers I’ve interacted with over the last 5+ years are into MSLA more than FDM. 🤷🏽‍♂️